Junk Drawer Advent Calendar

So I mentioned yesterday that I was working on a big project for the Gypsy Journal.  The design team was assigned to create at least one Christmas project of our choosing.  I love doing project when there are no rules, just great stuff to work with...hence the picture of the HUGE mess on my desk from the last post. This is what I came up with...

JUnk dRawEr aDveNt CaleNdar

It really is made from stuff that came out of drawers at my house.  Deb has this saying, "at arms reach" when she's working on something.  In other words, " I'm going to use what I have in the studio before I go to the store to buy something".  Now maybe I should preface that saying by mentioning that if you have ever been to or seen Debbie's studio you would not need to go to the store.  So much vintage stuff and the inspiration is endless.

So with that philosophy in mind I decided I was going to create something using 7gypsy product and the junk in my workroom. Remember, you saw my desk...I have a lot of junk.   Just that simple.

This is how I did it:

I had a ceiling tile in my garage, (don't ask me why) but you can purchase one at Home Depot for under $3. I laid out the tags I wanted to use to decide on spacing.  I used large tags (#8 Manila shipping tag 3 1/8 x 6 1/4"),  5 rows of 5 tags each for a total of 25 tags.

 Once I determined the spacing, I cut off about 5 inches off the ceiling tile using my clear quilting ruler (one of my FAVORITE tools in the workroom) and a box cutter.  The quilting ruler has a lip edge (very important) so it works like a carpenters square.  If the side is straight, the line will be straight.
The cut tile is 24 x 40",  however this size would change if you use a different size tags.

 I cut a piece of burlap (left over from another gypsy project) 2-3"  larger than the ceiling tile.

 I used my handy dandy staple gun to tack down the burlap.  Just remember to work in opposites... right side, left side, then top, bottom so that the fabric remain as tight as possible.

This is how I did the corners

A word of Caution: You have to be careful with ceiling tiles.  It is great for push pins (the reason I chose it...and it was in my garage) but if you drop it, it can break easily or the corners will pulverize and I won't even go into what it does if it gets wet...let's just say, "don't get it wet".  

Previously, I had used another product I found at Home Depot in the insulation department.  It came in a large sheet 4 x 8 feet.  It was much sturdier so it did not have the pulverizing problem that the ceiling tiles have.  My dad, who was with me when I bought it, mentioned it was used in walls for soundproofing.  I do not know if they still have this product or even what it was called.  What I do know is that there wasn't any in my garage last week when I started this project so I didn't use it.

Once I finished covering the board, I ran black seam binding around the edge of the board and secured with a couple straight pins.  I found some leftover upholstery tacks in a drawer and used them to secure the ribbon about every 5 inches.  I didn't have enough for the bottom so I just left the straight pins in.  I figured no one would ever see it.  I think the upholstery tacks would look great if they were pushed in the edge in a very haphazard way, like 2 together, then a space, then 1, then a space, then 3, etc.  I just didn't have enough on hand to do this.  Maybe it's back to the garge to look for more because the more think about it, the more I like the haphazard idea.

It takes at least 7 tacks on each of the long sides to finish the board like I did or about 24 total.

So if you like where this is going, come back tomorrow (a great week to sign up to be a follower) and I will show you how I did all the number pins.  Then after the pins we will tackle the tags.  I'll post close up images of the tags and give you step by steps for some that might need explanation on how I did it.  Email me if you have any questions. -paula